If you’re planning for a concrete driveway replacement in Columbus, one of the first questions is cost. While online estimates vary widely, most full driveway replacements fall within a predictable range depending on size, site conditions, and the scope of work.

Here’s what typically determines the price of a concrete driveway replacement in the Columbus area.

  • Size (square footage)
  • Site conditions (base, drainage, access)
  • Scope (tear-out, approach/apron work, upgrades)
  • Finish (broom finish vs. decorative)

We focus on the cost of replacing a broom-finish concrete driveway in this article. 

For many 600–800 sq ft broom-finish driveway replacements (full tear-out and replacement), pricing typically starts at $8,000–$11,000, depending on your driveway’s needs.

Fast facts

  • Many full driveway replacements in Columbus start around $8,000–$11,000 for typical 600–800 sq ft projects.
  • The biggest cost drivers are base repair, drainage/slope corrections, and approach/apron work.
  • Concrete gets hard and cracks. The goal is to manage cracks with proper jointing and prep.
  • Cheap bids often skip steps or come from newer “one-man operations” that may not be around later.
  • The right contractor should have a track record, a real process, and clear warranty terms.

Cost per square foot in Columbus (what it means, and what it misses)

You’ll see a lot of Columbus driveway pricing quoted on a per-square-foot basis. For a basic broom-finish driveway replacement, many sources estimate the market at $9–$17 per sq ft, depending on the scope and site conditions.

The problem is that per-square-foot pricing can be misleading unless the scope is identical. Two driveways with the same square footage can be priced very differently if one needs:

  • more demo/haul-off time
  • extra base stone and compaction
  • drainage or slope corrections
  • a thicker approach/apron section

If you want a real number, the best approach is an on-site measurement and scope check.

concrete driveway resurfacing cost per square foot project in Columbus Ohio

You’ll see lower estimates online – often in the $5,500 to $7,500 range. Here’s the honest difference: those numbers typically reflect thinner slabs (often 4 inches instead of 4.5), no water-repellent admixture, minimal or no base stone, and little to no drainage correction. Some contractors also skip haul-off or don’t include approach work in their initial quote, then add it later.

When you compare bids, ask what’s included. If someone’s significantly cheaper, find out what they’re not doing. A driveway that lasts 20+ years costs more upfront than one that cracks in 5.

What makes one driveway quote higher than another

These are the biggest drivers we see in Columbus:

1) Approach/apron work (often thicker)

Approaches take more stress and are often poured thicker than the driveway. For example, approaches are commonly poured to a depth of around 6 inches, which can increase costs. Permits are typically required for approaches, depending on the city and scope.

2) Base repair and extra excavation

This is one of the most common reasons two “same-size” driveways price differently. If the subgrade is soft or washed out, you may need more stone, more excavation, and more compaction.

3) Drainage and slope corrections

Drainage is critical in Central Ohio. If water sits on the slab or runs the wrong way, you’ll see problems sooner. Fixes may include:

  • adjusting slope
  • extending downspouts
  • correcting runoff patterns
  • adding drainage solutions when needed

Newer contractors often miss this. Experienced crews catch it early.

4) Reinforcement choices (when it makes sense)

Not every driveway needs the same reinforcement. We typically use fiber reinforcement in residential mixes, and we’ll add rebar or wire mesh when it makes sense or if the homeowner requests it (heavy loads, special conditions, or specific design needs).

5) Layout changes

Widening, adding an extra pad, or changing the layout adds square footage and labor. If you’re already replacing the driveway, it’s often the best time to do it.

Planning an outdoor project beyond the driveway? See our guide to concrete patio costs in Columbus for current broom-finish and stamped-patio pricing, plus the factors that affect your final quote.

 

Finish options and cost

broom finish concrete driveway in Powell Ohio

The finish you choose affects labor, materials, and sometimes sealing and maintenance. This post focuses on broom-finish driveway replacement (the most common). Decorative finishes typically cost more, including:

  • Broom finish (standard, most cost-effective)
  • Stamped (decorative patterns, usually higher cost)
  • Exposed aggregate (more finishing work, usually higher cost)
  • Aggregate/buff wash (decorative surface, usually higher cost)

If you’re considering decorative finishes, we can walk through a number of driveway colors, textures or patterns and pricing during your on-site measure.

A quick truth about concrete (and why experience matters)

Concrete does two things:

  1. It gets hard.
  2. It cracks.

Even when you do everything right, cracking can still happen. The key is to be an expert and do the work in a way that helps cracks fall in the right places.

That’s why control joints matter, and why the “cheap guy” isn’t always cheaper in the long run.

Cheap bids are often from someone who worked for another contractor, went out on their own, and later realizes running a business is hard. A year later, they’re gone. Then the homeowner has no one to call when issues show up.

When you hire a contractor, you want someone who’s been around and will still be around. A big part of avoiding the “cheap guy” problem is simply knowing what to ask before you hire a concrete contractor.

What Arlington Concrete includes (so you can compare bids)

Every project is different, but here’s what we build into our standard driveway replacements:

  • Full tear-out and haul-off
  • New concrete over a properly compacted base
  • 4.5 inches of 4500 PSI concrete (we pour a half-inch thicker than many)
  • 6.5-bag mix with 6% air entrainment for freeze-thaw durability
  • Fiber reinforcement in residential mixes
  • SIKA water-repellent admixture added to the mix
  • Control joints every 8 feet to help manage cracking

We also help homeowners confirm whether HOA approval is required and assist with the process. We pull permits when required (most commonly for approaches).

How the estimate process works

Driveway replacement pricing can’t be nailed down from a generic calculator. We schedule an on-site meeting so our owner, Matt, can:

  • take measurements
  • evaluate base and drainage conditions
  • confirm approach/apron needs
  • walk you through the process
  • give you a verified price based on your actual driveway

Matt has 30+ years in concrete across residential and commercial work, including experience on the production/manufacturing side.

Concrete driveway replacement at a residential home in Powell Ohio

Local Permit & HOA Quick Reference for Columbus Driveway Projects

Navigating local permit requirements and HOA approvals can add complexity to your concrete driveway replacement project. While Arlington Concrete assists homeowners with this process, it’s helpful to understand the general guidelines for some of the key Columbus suburbs we serve. Always confirm the latest requirements with your specific city and HOA before starting any work.

Understanding HOA Approvals

Many communities in Columbus, particularly in newer developments and affluent areas, have Homeowners Associations (HOAs) that require approval for exterior modifications, including driveway replacements. These approvals are separate from city permits and often involve submitting plans for review to ensure compliance with neighborhood aesthetic standards. Arlington Concrete can help you navigate this process, but it’s essential to check your HOA’s specific covenants and restrictions early in your planning.

Important Notes

Contractor Registration

Most cities require contractors to be registered and bonded. Arlington Concrete is fully licensed and insured to work in all these jurisdictions.

Right-of-Way (ROW)

Driveway approaches often fall within the public right-of-way, necessitating city permits even if the main driveway is on private property.

Fees

Permit fees vary by jurisdiction and project scope. Always consult the official city websites for the most current fee schedules.

 

Driveway replacement service area

We do a lot of work in Powell, Dublin, Upper Arlington, Worthington, Lewis Center, Galena, and Plain City/Jerome Township, but we serve all areas of Columbus.

man estimating cost to replace cement driveway in Columbus Ohio

Concrete driveway costs by area

Pricing varies slightly across the Columbus suburbs we serve, mostly because of permit requirements and local site conditions.

Powell

HOA communities are common here, which can add approval time, but doesn’t change the concrete cost. Drainage is critical in Powell due to soil conditions. Expect standard pricing, but budget for thorough base prep.

Upper Arlington

Older homes with established drainage issues are common. If your property has poor drainage or a soft subgrade, expect higher base prep costs. The good news: fixing it now prevents bigger problems later.

Worthington, Dublin, Galena, Plain City, Lewis Center

These areas typically fall under standard pricing. Permits are required, but site conditions are usually more predictable than in older neighborhoods.

The takeaway

Location matters less than what your specific driveway needs. That’s why we always measure on-site.

Frequently Asked Questions

How much does a 2-car concrete driveway cost in Columbus?

Many 2-car driveway replacements fall within a wide range, but full replacements often start at $8,000–$11,000, depending on size, base, drainage, and approach needs.

Why are some driveway quotes so much cheaper?

Usually because something is missing: haul-off, base stone, compaction, thickness, drainage correction, approach work, jointing plan, or warranty coverage.

Do control joints prevent cracks?

They help control where cracks happen. Concrete can crack even when done right, which is why base prep, jointing, drainage, and mix design all matter.

Do I need HOA approval or a permit?

Some neighborhoods require HOA approval. Permits are typically required for approaches depending on the city and scope. We’ll help with HOA steps and handle permits when needed.

How much does a 20x20 concrete driveway cost?

A 20×20 slab is 400 square feet. In Columbus, expect to pay $5,000 to $8,000 depending on site conditions, base prep, and whether tear-out is included. Price is affected by tear-out and haul-off, drainage corrections, and subgrade conditions. The square footage is the easy part – what’s underneath determines the real cost.

How much does it cost to remove and replace a concrete driveway per square foot?

Full removal and replacement in Columbus typically runs $10 to $18 per square foot installed. That includes tear-out, haul-off, base prep, and a 4.5-inch pour at 4500 PSI. Thinner pours with minimal site prep can come in lower, but they rarely last as long. For most two-car driveways in the Columbus area, the total project lands between $8,000 and $11,000.

Get a Free Quote

If you’re planning a driveway replacement and want a price you can trust, the fastest way is an on-site measurement and scope review. Matt personally handles every on-site estimate.

Pin It on Pinterest